Steel Doors

Material

Door Frames And Leaves Are Made From Stainless Steel – Grade 304 Hair Line Finish.

Door Leaves

Constructed From 0.80mm Thick Stainless Steel Sheet Press Formed To Provide A 46mm Thick Fully
Flush, Double Skin Door Shell With Lock Seam Joints At Stile Edges. In-fill Of Honeycomb Kraft Paper
Is Used To Give The Required Rigidity And Effective Acoustic Insulation.

Door Frames

Produced From 1.20mm (18g) Thick Stainless Steel Sheet Formed To Single Rebate Profile Of Size
100mm X 58 Mm.
The Door Frames May Be Built Into The Brick Or Block Walls Using Corrugated “tee” Anchors Not
Welded To The Frames (first Fix). Frames May Also Be Fixed On Plastered Openings With The Help Of
Anchor Fasteners (second Fix). Door Frames Are Supplied To Knockdown/welded From With Butt
Joints For Bolted Assembly At Site.

Vision Glass

Vision Glass With 5 Mm Clear Float Glass Can Be Provided In Circular, Square Or Rectangular. The
Circular Vision Glass Can Be Provided In 380 Mm Dia Only, Standard Rectangular Sizes
300 Mm X 500mm, 450mm X 750mm Amp; 350mm X 750mm.
Limitations On Vision Glass (for Non Standard Sizes):
Height Not Exceeding 1550mm, Width To At Least 300mm Less Than That Of The Shutter Width
Louvers
Factory Finished And Fixed Metal Louvers (single Proof) Can Be Provided In Square / Rectangular
Sizes.

Finish

The Doorframes And Door Shutters Are Of Stainless Steel – Grade 304hair Line Finish.

Ironmongery
Hinge

Stainless Steel Ball Bearing Butt Hinges 3 Mm Thick Fixed Flush To The Frame And Shutter (profile
102 X 76 X 3mm Thick)

Lock

Mortise Sash Lock With Lever Handles, Mortise Dead Bolt, Mortise Latch, Panic Devices Etc Can Be
Provided As Required.
Flush Bolts (double Door)
Concealed Extended Lever Action Flush Bolts Provided On The Top Of The Door To The Leading Stile Edge.

Door Closers

Doors Are Made Suitable To Receive A Large Variety Of Doors Closers.
Options
Door Coordinator, Smoke Seals For Air Tightness, Automatic Door Bottoms Etc., Can Be Provided If
Required.